Drum Clamp

Drum Clamp - Forklifts are actually used to move, lift and store products placed on pallets. For businesses that make use of drums, they often require an attachment to handle storing, lifting and moving them. There are several different attachments that a company can utilize for all your drum storing, lifting and moving needs. These attachments are particularly designed to handle drum containers - hence there is no chance of damage to the item or drum container when they are stored, moved or lifted.

Drum Positioner And Grab
The drum positioner is accessible in three and four tine models. They are used for the loading and unloading of drums off racks, vehicles and drum stands. This particular accessory is totally automatic, hence enabling the individual operating it to be able to operate all from the comfort of the lift truck seat. Able to move large and extra large plastic drums, steel, its capacity is 210 liters. This particular attachment is designed for drum pyramid stacking.

The drum grab could be mounted to the forks, with a designed objective of handling metal drums which have rolling hoops. Even if the initial purpose for the design was to handle steel drums with rolling hoops, the drum grab can help accommodate plastic drums too. Drum capacity maximum is 210 liters for steel drums with rolling hoops and 220 liters for plastic drums.

The Rotator
The drum rotator is another forklift accessory that mounts onto the forks themselves. Their purpose is to be able to pick up the drum and rotate it upside down. The drum is clasped into the drum rotator utilizing a clamp which fits around the middle of the drum. The rotation is performed by either a crank handle or a continuous loop chain. The crank handle is used for operations that take place below shoulder level. For operations which should occur above shoulder level, the continual circle chain will be utilized.

Drum tines are straightforward fork mounted accessory that could be intended for stacking and unstacking 210-liter metal drums. Stacking involves nothing fancy, only simple horizontal positioning of the drums. The carriage-mounted attachments reduce the load center of the drums.

Automatic Tongs
Drum tongs are available both semi-automatic and automatic models which could be used in the open topped and tight head metal drum kinds. The drum tongs could even be attached several various ways to the forklift. One method is to attach them beneath a fork-mounted hook. One more way is to connect them to a carriage mounted jib or a fork-mounted jib. Either the automatic and semi-automatic have a drum capacity of 210 liters. With the automatic, there is no need for the person operating it to ever leave the seat of the forklift.

Rim Grip Handler
The Rip Grip Drum Handler is the perfect alternative for forklift attachments, when there is a need to stockpile drums with limited area obtainable. This accessory can be utilized on both 120L and 210L drums. The Rim Grip Handler works by using steel jaws in order to hold the edge of the drum. It lifts the drum and sets it down without requiring any space between all of the drums. The average unit utilized in the industry is a zinc-plated handler, although, this accessory comes available in stainless steel for the food and drink industry.

Click to Download the pdf

Forklift Parts

Axle Tech Parts

Axle Tech Parts - The business of AxleTech International is a large supplier of specialty vehicle drive-train systems and parts together with off highway vehicles. They take great pride in being a preferred supplier to their customer base. AxleTech strives to exceed and meet their clients' expectations for technology, delivery, quality and service. They believe in working in an environment...

More

---

Throttle Body for Forklift

Forklift Throttle Body - The throttle body is a component of the intake control system in fuel injected engines so as to control the amount of air flow to the engine. This mechanism works by applying pressure on the driver accelerator pedal input. Normally, the throttle body is placed between the air filter box and the intake manifold. It is...

More

---

Forklift Mast Chain

Mast Chains - Utilized in different functions, leaf chains are regulated by ANSI. They can be utilized for forklift masts, as balancers between heads and counterweight in several machine devices, and for low-speed pulling and tension linkage. Leaf chains are sometimes likewise referred to as Balance Chains. Features and Construction Leaf chains are steel chains with a simple link plate...

More

---

Carriage Roller

Carriage Rollers - Particularly designed bearings called carriage rollers are often seen on lift masts since they enable them to work better within tough environmental surroundings. The conventional lift mast is often subject to frequent oscillations, shocks, vibrations and high dynamic and static loads. This apparatus is frequently exposed to environmental influences like for example cold, heat, dust, contamination, aggressive...

More

---

Telehandler Attachments

Telehandler Attachments - Telehandlers or also referred to as Telescopic handlers are extremely popular piece of heavy construction machinery usually utilized in agriculture and construction trades. These machines have maximum reaching ability and can get to places where a conventional lift truck cannot reach. Telehandlers allow the individual operating it to easily carry out anything a crane could do also....

More

---

Used Forklift Parts

Used Forklift Parts - In the long run, forklift parts will wear and have to be replaced. Acquiring new components could become a costly venture so another idea is to acquire used lift truck components. This could save much cash eventually. It is a good idea to acquire used lift truck parts which have been reproduced. These components will guarantee...

More

---

Industrial Jib

Industrial Jib - The forklift jib will allow a worker to be able to transfer their heavy heaps overtop of obstructions or obstacles on top of roofs, elevated platforms, or decks. They can be utilized to be able to reach the second and even third level building platforms to move or pick up loads at places which are still under...

More

---

Parts for Aerial Work Platform

Aerial Work Platform Parts - Aerial lift trucks can be utilized to accomplish several different tasks performed in hard to reach aerial spaces. Many of the tasks associated with this kind of jack include performing regular maintenance on structures with prominent ceilings, repairing phone and utility cables, lifting heavy shelving units, and pruning tree branches. A ladder might also be...

More

---